​Packing selection is a very important part of a turbine engineer's job. The wrong choice of packing will quickly become unusable and lead to leaks. There is a wide range of packing options available as there is a wide range of packing materials to choose

Expanded PTFE Sheet made from biaxial oriented expanded PTFE sheeting that is laminated to the required thickness. Expanded 100% virgin PTFE using a proprietary process that products a uniform and highly fibrillated microstructure with equal tensile stren

The expanded Polytetrafluoroethylene (EPTFE) sealing tape is a kind of strip sealing product, which is made of 100% expanded Polytetrafluoroethylene(EPTFE) material. The backside is lined with self-adhesive for easy use.

Graphite packing ring is made of flexible graphite sheet cut into ribbons or flexible graphite braided packing wound in the mold by pressing made of different specifications and sizes of the ring, this ring has excellent resilience and stability, it and o

​Ministry of Commerce: China implements export control on graphite items, not banning exports. On January 18, Ministry of Commerce (MOFCOM) spokesman He Yadong said at a regular press conference that it is a common international practice to implement expo

Completely clean the sealing area and remove any dirt, corrosion, oil or leftover from old gasket material. Cut one ending of the sealing tape and remove just a little of the protecting paper. Place the tape at the nearest possible position next to the

Gaskets are used to prevent fluid or gas leaks by providing a barrier between two mating surfaces. The gasket must be able to maintain a seal under pressure and temperature changes. A number of different gaskets are available: pre-cut

​A new gasket solution from 3M combines an exceptionally conductive pad with a double-sided adhesive that is repositionable. The new 7810 series of 3M Electrically Conductive Acrylic Pads (eCAP) offers cohesive strength, shock absorption and strong adhesi

Ordinary PTFE has better mechanical properties, electrical properties, chemical resistance, creep resistance, processability, etc., and its advantages are more obvious in engineering fields that require higher safety and reliability.

Wrap the graphite packing on a tube with the same diameter as the shaft, wind it tightly but not stretch it, and cut it after alignment. Note: Do not use the method of surrounding the stuffing box to measure the length. Cut off the first sealing ring, try

This kind of heat preservation and heat insulation board has unparalleled excellent performance of other similar boards: it has good heat preservation and heat insulation performance with its extremely low thermal conductivity; it has excellent waterproof

PTFE flange gasket is a kind of non-metal gasket, generally composed of two parts, covering layer and insert. The coating layer mainly plays a role of corrosion resistance and is usually made of polytetrafluoroethylene. The insert (filler) is a non-metall

Core Tip: The effective sealing of pumps and valves depends on the overall condition of each component. Pay special attention to the fact that before packing installation, make sure that the equipment that needs to be replaced has been effectively isolate

①Surface condition of the sealing surface: The shape and surface roughness of the sealing surface have a certain influence on the sealing performance, and the smooth surface is good for sealing. Soft gaskets are not sensitive to surface conditions due to

With the continuous emergence of production technology, the weaving forms of packing packing have gradually diversified. According to different use conditions and environments, different weaving forms have a direct impact on the performance and service li