Graphite Sheet Reinforced with tanged metal insert is made from Flexible graphite sheet through specially pressing or sticking process. The insert materials can be SS304, SS316, Nickel, etc. It used in kinds of conditions, and various gaskets.

The corrugated metal gaskets (CMG) have been proven to be both reliable and cost effective for the application on flanges and heads where boat loading is sufficient.

Introduction: Natural rubber has good technical performance, high elasticity, green environmental protection, high mechanical strength, wear resistance, pressure resistance, high elongation, high elasticity, low hysteresis loss, resistance to multiple fle

Introduction: EPDM is a synthetic rubber elastomer known for its tolerance to a variety of environmental conditions. EPDM is mainly composed of ethylene and propylene derived from oil and natural gas, and also contains diene components used as crosslinker

Has a low heat conductivity at high temperatures and resists high gas velocity, which makes it ideal for boiler ducts, for kiln linings in glass and ceramics and for stack lining.

Graphite sheet reinforced with metal foil is made from there layers, at the middle of the flexible graphite sheet is one stainless steel foil. Through specially pressing or sticking process. The insert materials can be SS304, SS316, Nickel, etc. It can be

Introduction:PTFE packings have excellent corrosion resistance, self-lubrication and non-stick properties.This material also has low thermal capacity, cold flow ability and large thermal expansion.It is a material with properties.

Introduction:Expanded Soft Tape made from a special grade PTFE resin with one side adhesive strip. Product application:This expanded soft tape fills all the voids in uneven or damaged surfaces thereby giving perfect sealing. It is chemically inert and

This type of gasket is manufactured by spirally winding a preformed V-shaped metal strip or tape combined with a filler material. The metal provides the gasket's strength and elasticity, while the filler material ensures excellent tightness.

This type of gasket is manufactured by spirally winding a preformed V-shaped metal strip or tape combined with a filler material. The metal provides the gasket's strength and elasticity, while the filler material ensures excellent tightness.

This type of gasket is manufactured by spirally winding a preformed V-shaped metal strip or tape combined with a filler material. The metal provides the gasket's strength and elasticity, while the filler material ensures excellent tightness.

This type of gasket is manufactured by spirally winding a preformed V-shaped metal strip or tape combined with a filler material. The metal provides the gasket's strength and elasticity, while the filler material ensures excellent tightness.

This type of gasket is manufactured by spirally winding a preformed V-shaped metal strip or tape combined with a filler material. The metal provides the gasket's strength and elasticity, while the filler material ensures excellent tightness.

It is made with 100% PTFE and is expanded with a unidirectional structure. It is a compressible material that can adapt to almost any sealing surface, including damaged surfaces.

The Acrylic Fiber Packing is braided from Acrylic fiber which is impregnated with a custom made Fluoropolymer dispersion & further lubricated with break-in lubricant that facilitates low friction and make the packing dense, resilient and flexible.

Aramid fiber packing braided from high quality Dupont aramid and kevlar fiber with PTFE impregnated and lubricant additive. It is wear resistant but may damage the shaft is not used properly. A minimum shaft hardness of 60HRC is therefore recommended.

PTFE sheet (also called Teflon sheet) is divided into two types: molded and turned. Its products are widely used and have extremely superior comprehensive properties: high and low temperature resistance (-80℃- + 260℃), corrosion resistance (strong acid, s

High silica cloth refractory fiber is a high temperature resistant inorganic fiber, with a silica (SiO2) content higher than 96%, a softening point close to 1700℃, and can remain in good condition after long-term use at 900℃, working at 1450℃ for 10 minut